MADE IN USA | 3 Year Warranty!
Bottle-Matic-2 bottle labelers enable the user to label all kinds of cylindrical objects front and back by simply setting the desired spacing using the index knob. Then insert the container and pressing a foot switch. Once the foot switch is activated the label is applied, then the machine inserts a gap that was set with the index knob, and immediately applies the 2nd label. Most wine bottles are labeled in less than 5 seconds! This allows the user to quickly remove the bottle and insert another to start the procedure again. Once a rhythm is established bottles are labeled VERY quickly. Loading is a inch snap inch , just feed the labels between the dispensing tables then through the patented feed-roll assembly and inch snap inch into place.
DON feetT BE FOOLED! Know your getting the REAL DEAL with Bottle-Matic-II, we designed the machine from the ground up! (Not imported, or a knock-off)
SATISFACTION GARANTEED. If we cannot make you happy within 21 days, send it back. It must be in new resellable condition though.
Label objects from .5 inch to 10 inch diameter. From a Test Tube to a 1.5 gallon bottle
Gap adjustment is quick and easy, turn the knob to the desired gap in inches to 100th of an inch.
ACCURACTE! Can hold repetitive gap spacing to 1/16 inch or less on most containers. Holds 1/64th inch side-side accuracy on most containers.
Label cylinders to 15 inch length (or longer if the item has a neck)
Able to handle most tapered containers by simply adjusting the idle roller position.
Labels over 1000 pcs per hour with average dexterity. (more if you have a fast employee)
Side frames: Laser-Cut from the drawing quality steel then formed, countersunk, de burred, and inspected one at a time at our facility.
Dispensing Tables: formed out of 6061-T6 Aluminum. The peel edge is hand milled to spec within .001 inch using a special hand-made cutting tool to get that perfect peeling edge needed to dispense labels without tearing the backing paper. (35 years of perfecting the peeling action)
Dispensing tables are POLISHED with ultra-fine polishing compound so paper flows freely around the plate.
The Bottle-Matic-II uses DUAL motors that are shaded pole AC, and made in the USA to our specifications. (No CHEAP 12v motors here!)
Costs are a fraction of similar machines of the same build quality.
Micro-Switch activated, will work on all kinds of labels.
Ask for any modifications necessary for those hard to label containers, but know that this unit labels most containers without modification.
You will not be disaponted with this bottle labeler. Give it a try today.